This is a long length post focus on BMW F30 F32 coding.It list coding successful projects,some need to be tested or checked and ineffective or unavailable codes.We should thanks to Halslfer to gathered and collected this cheat sheet.
For freshman,you need more knowledage about BMW coding and some tools to complete your project,so check article below to learn if you are not good at BMW coding.
BMW Coding Software Gudie:
How To Use BMW E-sys Coding Software
BMW F Series Sport Display Coding Gudie
Active/Disable BMW X5 Lock/Unlock Beep Sound Confirmation
How to generate BMW NBT & CIC FSC code
BMW F15 X5 FDL Coding HUD Head-up display
How to change BMW FA (VO) in F-series car
How to coding BMW F10 DVD in Motion
How to generate BMW FSC Code by yourself
How to enable BMW F-series Dazzle LEDs
BMW E-sys program BMW F-series FA Guide
BMW Coding for Rolling windows up with remote key
BMW Coding/Flashing/Progrmming PDF+Video Guide
Some software and hardware you need:
BMW Standard Tools 2.12 Free Download
BMW E-sys Coding Software Free Download
Here list the BMW F30 F32 Coding Cheat Sheet:
Note:Click the items you want to jump to detail info
FA Codes (VO Coding)
Activate Active High Beam Assistant (Anti-Dazzle)
Activate Variable Light Distribution
CAFD Codes (FDL Coding)
Angel LED Brightness (Xenon Headlamps or LED Headlamps required)
Cornering Lights (Fog Lamps) & Fog Lamp Welcome Lights
Enable Taillights as Day-Run Lights & Activate Rear Fog Lamps
LED Replacement Turn Signal Bulbs Activation
Vehicle Drivetrain Features & Sport Features
General Locking/Window Features & Convenience Features
Video In Motion & Playback Features, Owner’s Manual in Motion, and Camera in Motion
Headlamp Washers Configuration
Advanced Real-Time Traffic Information Activation
CODES THAT NEED TO BE TESTED OR CHECKED
INEFFECTIVE OR UNAVAILABLE CODES
FA Codes (VO Coding)
It’s recommended to VO code first before doing any CAFD coding,since VO coding will return values to their defaults.
Activate Active High Beam Assistant (Anti-Dazzle)
Active High eam Assistant (AnB-Dazzle) requires the vehicle to be equipped with Hig Beam Assistant.This enabled the system to enable high beams to dodge vehicles by independently moving the high beams around in each headlight without blinding other drivers.
MODIFY THE READ FA-Remove 5AP from the vehicle FA.
VO CODE-FEM_BODY and FLA/KAFAS2(whichever you are equipped with).
The CAFD modificaKons of HBA funcKonality aLer VO coding in FEM_BODY and FLA/KAFAS2:
The Speed HBA Enables-C_HBA_ENA_V_HI (Value in HEX for speed kph)
The Speed HBA Disables-C_HBA_ENA_V_LO(Value in HEX for speed kph)
The Speed to immediately enter Highway Mode-C_HBA_HGWY_V_HI(Default:Werte=8C)[Hex8C=Decimal 140=140 kph]
The Speed toleave Highway Mode-C_HBA_HGWY_V_LO (Default: Werte=5A)[Hex 5A=Decimal90=90kph]
It is recommended,if not,possibly required to enable Variable Light Distribution inorderto have AcKve High Beam Assistant become fully acKve. InstrucKons are below for enabling Variable Light DistribuKon
Activate Variable Light Distribution
Variable Light Distribution requires a FLA/KAFAS camera to be installed in the vehicle.This allows the light beam to adapt according to vehicle speed.When driving in thecity, a low beam is used to beber illuminate the road immediately ahead without dazzling oncoming drivers.Then at higher speeds, the headlamps are raised to increase visibility.
MODIFY THE READ FA – Remove 8S4 from the vehicle FA.
VO CODE–FEM_BODY and FLA/KAFAS2 (whichever you are equipped with).
Enhanced Bluetooth requires the vehicle to be equipped with HU_NBT or have a combox if you have HU_CIC or HU_ENTRY.This enables you to stream audio via Bluetooth, enable artwork,and USB stream music as well.
MODIFY THE READ FA -Change 6NH to 6NK or 6NS from the vehicle FA.
VO CODE–CMB_MEDIA and HU_CIC/HU_ENTRY or HU_NBT.
iDrive Office is sometimes disabled based on Country Controllers.This will enables you to have access to the Office Menu which will be
located on the main iDrive menu.(This offers Contacts,Email reading,Text Message Receiving,etc.)
MODIFY THE READ FA -Remove Country Controller code (SL8Ax) from the vehicle FA.
VO CODE–CMB_MEDIA and HU_CIC/HU_ENTRY or HU_NBT.
CAFD Codes (FDL Coding)
**It’s recommended to VO code first before doing any CAFD coding,since VO coding will return values to their defaults.**
Highlight References
Blue Highlight-Enabled/Working on my vehicle (for my reference) Yellow-Check Section Desc.Red-Issue
HEX Information:Most,if not,all values (werte) will be in HEX.You need to convert the value from HEX to Decimal to get the true value.
(Some Examples:08—>8;1F—>31;32—>50;64—>100;FF—>255)
HEX Units:Speed:km/h; Time:Seconds/Hours; Distance:Meters
Angel LED Brightness (Xenon Headlamps or LED Headlamps required)
These adjust the brightness of the Angel LEDs. The values are in Hex. (Ex. 0% = 00, 25% = 19, 50% = 32, 100% = 64) **Supposedly doesn’t work on F32**
Cornering Lights (Fog Lamps) & Fog Lamp Welcome Lights
Fog lights illuminate in the steered direcKon. **Front Fog Lights are required for all featuresbelow**.
Enable Taillights as Day–Run Lights & Activate Rear Fog Lamps
**Not sure which of the inner tail light enable code works** Rear Fog Lights require a
Workingm Rear Fog Light Bubon, which ca be done by using the plasKc piece in place fthe bubon and breaking the plasKc stopper inside the piece.No parts need to be bought.
**Door handle illuminaNon in Reverse is already active on vehicles equipped with Top-View Camera. *TranslaNon for Auto Headlamp code: empfindlich (sensiNve) ; sehr_empfindlich (very sensitive) ; unempfindlich insensiNve);Tagfahrlicht (DRL)
LED Replacement Turn Signal Bulbs Activation
With tradiKonal turn signal bulbs, the F30 needs to check if the bul is sKll aliveandworking every 4 minutes he vehicle is on,resulKng in a very small pulse being sent to the light bulb,not enough to illuminate but enough to verify the bulb is present and working. With LEDbulbs, this causes an actual flicker.These codes below remove the pulse monitoring and enables LED bulb recogniKon.Recommended bulb: CREE 30W XB-D5 LED
When tesKng Speed Correction turned off, it causes the speed to always be approximately 2 mph lower than Cruise Control set speed. Also, it’s
recommended not to set clock via GPS if equipped with BMW Online.**6WA Cluster is the Extended Instrument Cluster**
Specific coding opKons for seatbelt chimes/reminders and safet disclaimers in iDrive.
Vehicle Drivetrain Features & Sport Features
**Sport Mode Configuration works properly in HU_CIC, but not in HU_NBT with AdapNve M Suspension.**
General Locking/Window Features & Convenience Features
Opening/Closing via Comfort Access not included because it’s already enabled by default.**HKFM codes are F31 (sports wagon).20minutes Nll acNve.**
**ASP_MAX_GESCHWINDIGKEIT_BEIKLAPPEN requires ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN to be same or higher value.**
These are features that vary between all the iDrive functions (Vehicle Status, NavigaKon,Sound Sesngs, etc.) grouped by relaKvity.
**Note: CMB_MEDIA code may or may not be under the HU_NBT module, since the combox is integrated in HU_NBT.
**Not all HU_CIC codes will work properly for HU_NBT and vice-versa, so if it’s not labeled for your equipped head unit, there is no guarantee it will work.
STARTUP EMBLEMS:variant_0, variant_2,and variant_6-BMW Connected Drive ;variant_1-///M ;variant_3-BMW i;ariant_4-Mini ;
variant_5-Rolls Royce ;variant_7-BMW White Startup;variant_8-BMW Brown Startup;variant_9-BMW Merry Christmas and Happy New Year
Video In Motion & Playback Features,Owner’s Manual in Motion, and Camera in Motion
*USB Video playback should already be enabled in HU_NBT.
**Most of the Heads-Up Display functions are already active in the 2013+ F30/F32s.**
Headlamp Washers Configuration
**This will only work if you are equipped with Headlamp Washers, in the Cold Weather Package**
Most of these funcKons should work or change as labeled.However, I have yet to go through
tesKng with these.
Once BMW Live is enabled,you can tether your phone data to your vehicle to use the in-‐vehicle internet browser and BMW Live Access.However, you will lose the ability to do
Online Searches in Navigation and BMW Online Services.
**Not a recommended if your car includes BMW Online/Assist**
Advanced Real-TimeTraffic Information Activation
To acKvely change routes based on Traffic, enable Traffic Info under Options in Navigation andenable Dynamic Guidance in Route Preferences.
CODES THAT NEED TO BE TESTED OR CHECKED
INEFFECTIVE OR UNAVAILABLE CODES
To actively change routes based on Traffic, enable Traffic Info under Options in Navigation and enable Dynamic Guidance in Route Preferences.
