This article show a guide on how to program Volvo PTT accessory kit.And for more about PTT test cases,check here:Volvo PTT Test Cases
What You Need?
2024 Volvo TechTool PTT 2.8.241 APCI 0.7.1.0/2.7.116 All Version Free Download
Volvo Diagnostic Kit (88890300)
Volvo VOCOM 88890300 Diagnostic Kit
Procedures:
Run Volvo PTT and login your user ID and input you password
If it show you with below warming massage,please scroll down and click “Yes” to continue
IMPORTANT:Must be connected to the vehicle to run Accessory Kit
After vehicle has been identified,you need to enter your work order number,then click “Start Work” to continue
Select “Program” tag and check preparations conditions
Then select “Accessory Kit” under the operations,and click “Start” to continue
In the kit number field,enter an accessory kit number and click “Program” to apply the kit.
Volvo PTT will check the conditions to program accessory kit:
1.Battery voltage above 10V
2.Parking brake applied
3.Ignition key is ON position,engine not running
Then click “Click” continue to process
Programming Steps:
Reloading software part numbers
Downloading software from central system
Programming Electrical Control Unit
Programming completes
Click on Exit when programming is completed.