Program A Spared Key for BMW CAS3/CAS3+

Here comes guide on how o program a new spared key for BMW CAS3/CAS3+.Hope it helps!

 

Tools

VVDI2 Key Programmer

A laptop

 

Procedures:

First connect VVDI2 with car and use the old key to turn ignition on. Open the software when I click Connect it automatically show me car information and “connect OK”.

vvdi2-commander-make-bmw-remote-key-1

Click Key Learn

vvdi2-commander-make-bmw-remote-key-2

Click Get Key Info and I see two options: one add key, one lost all key. I choose Add Key then NEXT.

vvdi2-commander-make-bmw-remote-key-3

And it says the dealer key should be taken away. So pull out the old key and I click OK.

vvdi2-commander-make-bmw-remote-key-4

It read out all key information. I click Save Key Info below to save the original key data.

vvdi2-commander-make-bmw-remote-key-5

Next I choose KeyID3 and click Prepare dealer key with programmer.

vvdi2-commander-make-bmw-remote-key-6

It asks me to put new key into programmer. So I put the new key into VVDI2 coil.

vvdi2-commander-make-bmw-remote-key-7

Then it asks if the key has keyless, I say no.

New key is made but locked. So as the tips I use the key to start car.

vvdi2-commander-make-bmw-remote-key-8

Yes. Car starts successfully as I expected!