MUT-3 Register New Keys for Mitsubishi Lancer 2008

Here is a step-by-step guide on how to use MUT-3 diagnostic software to register a new key for Mitsubishi Lancer 2008.

MUT-3-Register-New-Keys-for-Mitsubishi-Lancer-2008-1

 

Preparations:

MUT-3 MUT-III Mitsubishi Diagnostic Software Free Download

 

Procedures:

Connect MUT-3 interface between Mitsubishi Lancer OBD port and PC,then run MUT-III SE software.

MUT-3-Register-New-Keys-for-Mitsubishi-Lancer-2008-2

Select “STV”

MUT-3-Register-New-Keys-for-Mitsubishi-Lancer-2008-3

After vehicle communication build,it will show you with the vehicle information as below

MUT-3-Register-New-Keys-for-Mitsubishi-Lancer-2008-4

Now you need select “KOS/IMMO/Keyless/TPMS” from System list,then click “OK” button

MUT-3-Register-New-Keys-for-Mitsubishi-Lancer-2008-5

Then click “Special Function”–>”Key Registration”

MUT-3-Register-New-Keys-for-Mitsubishi-Lancer-2008-6 MUT-3-Register-New-Keys-for-Mitsubishi-Lancer-2008-7

 

Execute the key Registration

Input the password,and press “OK” button

MUT-3-Register-New-Keys-for-Mitsubishi-Lancer-2008-8

Mitsubishi Key programming/registration completed.

If you need to register additional keys,insert additional key,turn IG on and press OK button within 30 seconds.

MUT-3-Register-New-Keys-for-Mitsubishi-Lancer-2008-9

If you only want to register only one key,click “No” button and test you need key.

 

(Visited 7 times, 1 visits today)