HINO J05E Engine 2018 P0016 Crankshaft Position Sensor Solution

Here is the instruction show you guide on how to solve HINO J05E Engine 2018 P0016 crankshaft position sensor and camshaft position sensor rationality.

HINO J05E Engine 2018 P0005 Trouble Code Repair Guide

 

Related Contents:

Nexiq USB2 Diagnostic Adapter

2024.01 HINO Diagnostic Explorer DX3/DX2 Diagnostic Software Free Download

HINO Trucks EPC Electronic Parts Catalog 2018 2016 Free Download

 

 

Technical Description:

1) A phase difference (deviation) between the engine speed main sensor (crankshaft position sensor) pulse and engine speed sub sensor (camshaft position sensor) pulse is diagnosed.

 

Description of Malfunction:

1) Detect the phase difference between engine speed main sensor (crankshaft position sensor) pulse and engine speed sub sensor (camshaft position sensor) pulse.

 

DTC Set Condition: .

1) DTC Detection Condition: :

  1. a) Battery voltage is in the range of 10 to 16 V.
  2. b) Engine speed is in the range from 700 to 1,000 r/min.
  3. c) Engine coolant temperature is 60 °C {140°F} or higher.
  4. d) A difference between an actual engine speed and a target engine speed is 20 r/min or less.

 

Judgement Criteria:

1) A phase difference between the engine speed main sensor (crankshaft position sensor) pulse and engine speed sub sensor (camshaft position sensor) is 7° or more for 1 second or more continuously.

 

Reset Condition:

1) After restoration to normal condition.

Indication, Warning or System Control Regulation When The DTC Is Set:

1) MIL: ON .

2) SVS light: OFF

 

Symptoms On The Vehicle The DTC Is Set:

1) Symptoms On The Vehicle Due To Backup Control (Fai Safe Function):

  1. a) None

2) Symptoms On The Vehicle Due To Malfunction:

  1. a) None

 

Pre-Inspection Work:

1) Check that the battery voltage is in the normal range.

After-Inspection Work:

1) Clear all past DTCs.

2) Check that no DTC is detected after test drive.

 

Possible Causes:

1) Camshaft gear: Check assembly.

2) Flywheel: Check for miss assembly.

3) Engine speed main sensor (crankshaft position sensor):

4) Check the installation position.

5) Engine speed sub sensor (camshaft position sensor): Check the installation position.

 

More case for HINO please refer to:HINO Trouble Repair

Visited 1 times, 1 visit(s) today