This instruction show the operation steps of how to use Launch X431 PAD III to calibrate ISM(Intelligent Servo Module) for Mercedes Benz S600L.And for more Mercedes Benz repair,please check this tag:Mercede Benz Repair Cases.
Benz S600L ISM Calibration Guide:
1) Build connection between Benz S600L and Launch X431 PAD III,then enter menu to select “Local Diagnosis” -> “Mercedes”
2) Select “Automatic Search”
3) It displays the vehicle information, after confirmation, click OK
4) Select “System Scan”
5) Select YES to start the test
6) Switch on the ignition, then click OK
7) Scan the configured system by fast test
8) Select “Intelligent servo module”. Turn on the ignition, click OK to enter the system
9) Select special function
10) Select “Perform calibration”. After confirming that the conditions are met, click YES to perform learning ISM
11) It prompts to wait
12) After successful calibration, click Back
13) Follow the prompts to turn the ignition off and on, then click OK
14) Calibration learning by Intelligent Servo Module has ended
More Launch X431 Training article,please check here:Launch X431 use guide