COBB Accessport V3 Perform PDK Transmission Clutch Re-Learn for Porsche

This article show a step-by-step guide on how to use COBB Accessport V3 perform PDK transmission clutch re-learn for Porsche.

 

Performing a clutch re-learn allows the transmission to verify the location of the clutches in the transmission and how thick they are.  This enables the computer to make adjustments to clutch engagement as the transmission wears over time.
Adjusting Clutch Torque will increase clamping force and can help higher horsepower vehicles hold power more effectively and minimize slip.
Touch Point Correction alters the point at which the clutch engages. A Clutch Re-Learn is necessary after the Accessport has programmed the car’s PDK map to Stock or Stage 0, or if the shifting on the car feels hard/abrupt.

 

 

Applicable Model/Year

AP3-POR-002:

2010-2013 Porsche 997.2 911 Turbo w / PDK Transmission

2010-2013 Porsche 997.2 911 Turbo S w/ PDK Transmission

AP3-POR-006:

2012-2016 Porsche 911.1 NA Carrera (Base, S, GTS) w/ PDK Transmission

2014-2016 Porsche 911 Turbo and Turbo S w/ PDK Transmission

AP3-POR-007:

2013-2016 Porsche 981 Cayman and Boxster (Base, S, GTS) w/ PDK Transmission

AP3-POR-008:

2009-2012 Porsche 987.2 Cayman S w/ PDK Transmission

2012 Porsche 987.2 Cayman R w/ PDK Transmission

2009-2012 Porsche 987.2 Boxster S w/ PDK Transmission

2012 Porsche 987.2 Boxster Spyder w/ PDK Transmission

2009-2012 Porsche 997.2 Carrera S w/ PDK Transmission

2009-2012 Porsche 997.2 Carrera 4 S w/ PDK Transmission

2011-2012 Porsche 997.2 Carrera GTS w/ PDK Transmission

2011-2012 Porsche 997.2 Carrera 4 GTS w/ PDK Transmission

 

 

Note:

A clutch re-learn performed when the PDK Transmission is not up to temperature (176F/80C) could cause incorrect learning points. The Clutch Re-Learn process will take 8-12 minutes (some cars may take longer), so be sure you are ready to keep your foot on the brake for the allotted time.

DO NOT BE ALARMED* The Clutch Re-Learn Process will require movement by the clutches in the vehicle. It is normal to hear noises and feel clunking during the Re-Learn time period.

 

Warning:

Please make sure your PDK Transmission is at operating temperature (176F/80C) before performing the Clutch Re-Learn. The vehicle ignition must be “ON” and PDK Transmission put into “P” park. 

 

 

Porsche PDK Transmission Clutch Re-Learn:

1.Start up your car and let the engine temperatures reach at least 176F/80C and transmission temperatures reach 140F/60C.
2.Go to the “Troubleshooting” menu.

COBB Accessport V3 Perform PDK Transmission Clutch Re-Learn (1)

3.Select “PDK Service.”
COBB Accessport V3 Perform PDK Transmission Clutch Re-Learn (2)

4.Select “PDK Relearn.”

COBB Accessport V3 Perform PDK Transmission Clutch Re-Learn (3)

5.Verify that the ignition is in the ON position and engine is OFF. Select “Continue.”

COBB Accessport V3 Perform PDK Transmission Clutch Re-Learn (4)

6.An ECU learning reset will now be completed.

7.Follow the prompt directions to complete an ignition key cycle. Once completed, select “Continue.”

COBB Accessport V3 Perform PDK Transmission Clutch Re-Learn (6)

8.A series of prompts will appear that ask to make sure car is at operating temperature. Select “Continue” to proceed if the car meets these conditions. If these conditions are not met and you continue anyways, the Re-Learn will fail and you will need to repeat this process once the transmission and engine are at the appropriate temperature.

COBB Accessport V3 Perform PDK Transmission Clutch Re-Learn (7)

9.A prompt will appear and ask to keep your foot on the brake during the relearn process. You can now depress the brake and hit “Continue.” Only light pressure is needed.

COBB Accessport V3 Perform PDK Transmission Clutch Re-Learn (8)

10. Start the motor. A prompt will appear to ensure that the engine is running and the car is in “P” Park with the parking brake not engaged. It will be nessecasry to have the headlights OFF and the Air Conditioning not running. Select “Continue” to move forward if these conditions are met.

COBB Accessport V3 Perform PDK Transmission Clutch Re-Learn (9)

11. PDK relearn will begin. The process will take several minutes to complete (some vehicles may be around 15 or 20 minutes).

Verify that you leave your foot on the brake during this entire time.

DO NOT BE ALARMED* The Clutch Re-Learn Process will require movement by the clutches in the vehicle. It will be totally normally to hear noises and feel clunking during the Re-Learn time period.

 

COBB Accessport V3 Perform PDK Transmission Clutch Re-Learn (10)

12.Done!

COBB Accessport V3 Perform PDK Transmission Clutch Re-Learn (11)