Here is the instruction show you guide on how to solve Deutz EMR3 engine fault code 94 /523239/FrmMngDecV1.
Error description CAN ERROR DEC-V1
CAN message DecV1 (Pseudo Pedal): the message can not be received by ECU or the received value is above the target range
Preparations:
2023 Deutz Serdia 4.0 Serdia 2010 v14.1.9.1 Diagnostic Software Free Download
Deutz Serpic EPC Parts Catalogue 2014 2012 Free Download
Error Codes
DEUTZ-Errorcode: 94
BlinkCode (short-long-short): 5 – 2 – 6
SPN: 523239
Possible FMI:
12: Defective component
12: Defective component
12: Defective component
2: data stream is defective
Error Detection
Error lamp shows permanent light. Entry in error memory.
Possible Reason for Error:
Missing or value above target range (message “DecV1” = pseudo pedal), CAN bus wrong cabled, wiring is demaged, receiver (sender of the message) work inaccurately,parametering inaccurate
Take actions for error repair
Check CAN Bus cabling (Bus sheduling,polarity,short circuit,power interrupt), test protocol of receiver, check CAN functional range other error properties
System reaction:
Warning, changing to substitute values according to customers configuration.
Behaviour error lamp: permanent light
Selfhealing: yes
Signal Priority: 1