How to Use Launch EasyDiag/Golo 3.0 to Do Long Coding for Skoda Laura 2011

Here show you guide on how to use Launch EasyDiag 3.0 or Golo 3.0 to perform ECU long coding for Skoda Laura 2011.In this example,we need recover long code after replacement ECU.And for more about Launch X431 products test,please check it here:How to use Launch X431

Launch-EasyDiagGolo-3.0-to-Do-Long-Coding-for-Skoda-Laura-1

 

Preparations:

Launch EasyDiag 3.0 or Launch Golo 3.0 (Launch on Amazon)

DIAGZONE PRO App

 

Procedures:

Connect EasyDiag 3.0 or Golo 3.0 to Skoda Laura obd port,then run DIAGZONE PRO on your mobile phone.

Select “Skoda”

Launch-EasyDiagGolo-3.0-to-Do-Long-Coding-for-Skoda-Laura-2

It will build connection to Skoda Laura,just wait process..

Then select “System Selection”

Launch-EasyDiagGolo-3.0-to-Do-Long-Coding-for-Skoda-Laura-3

Select “01 Engine Control Module”

Launch-EasyDiagGolo-3.0-to-Do-Long-Coding-for-Skoda-Laura-4

Now here you are available to check the ECU information

The Long Coding:00000000000000000000

Launch-EasyDiagGolo-3.0-to-Do-Long-Coding-for-Skoda-Laura-5

Press “OK” and select “Read DTCs” you will find there is a “P161200:Engine Control Module incorrect Coding” code.

Launch-EasyDiagGolo-3.0-to-Do-Long-Coding-for-Skoda-Laura-6

Now you back to select “21 Long Code”

Launch-EasyDiagGolo-3.0-to-Do-Long-Coding-for-Skoda-Laura-7

Now input the old 20 digits long coding,then press “OK”

Launch-EasyDiagGolo-3.0-to-Do-Long-Coding-for-Skoda-Laura-8

And press “Save” to start long coding

Launch-EasyDiagGolo-3.0-to-Do-Long-Coding-for-Skoda-Laura-9

Now you will find long coding finishing

Launch-EasyDiagGolo-3.0-to-Do-Long-Coding-for-Skoda-Laura-10

And read DTC again,the P161200 disappeared.

Launch-EasyDiagGolo-3.0-to-Do-Long-Coding-for-Skoda-Laura-11

(Visited 20 times, 1 visits today)