BMW X3 Angel Eyes Installation & Retrofit

This show the guide on how to install &retrofit BMW X3 angel eyes.I will introduce the procedure step by step with picture and text.Hope this article will bring some enlightenment to your own work.

 

Procedures of BMW X3 Angel Eyes Installation & Retrofit:

Step 1 is to obtain a good power source for the Angel Eyes. Below is a picture of the ECU. Here I tapped into the accessory power supply. This is what makes the angel eyes light up when the key is turn to position 2.

BMW X3 Angel Eyes Installation & Retrofit (1)

Relay, 12V power and ground.

BMW X3 Angel Eyes Installation & Retrofit (2)

Everything wired. Fingers crossed. It works!

BMW X3 Angel Eyes Installation & Retrofit (3)

Back of headlights

BMW X3 Angel Eyes Installation & Retrofit (3)

Everything removed from headlights.

BMW X3 Angel Eyes Installation & Retrofit (5)

I was scared shitless during this part. Headlight housing apart after baking in oven @ 200F

BMW X3 Angel Eyes Installation & Retrofit (6)

Amber reflector removed.

BMW X3 Angel Eyes Installation & Retrofit (7)

I used siliconII (operating temperature up to 400F) to glue on the angel eyes.

BMW X3 Angel Eyes Installation & Retrofit (8)

Housing back togeather. No more ugly amber reflector!

BMW X3 Angel Eyes Installation & Retrofit (9)

BMW X3 angel eyes installation & retrofit complete!

BMW X3 Angel Eyes Installation & Retrofit (9)

Visited 1 times, 1 visit(s) today