This article show you guide on how to use Zed-Full perform all keys lost programming for Toyota Corolla 2013+ Keyless Go Keys.
Plug Zed-Full to Toyota Corolla obd port
Select “OBD Application”
Select “ZFH-UTE Programming” and click “Continue” button
Keep the driver side door open,turn ignition OFF and click continue button
During this process working keys data is being transferred to Zed-Full
Now connect “ZFH-C15” cable to the Zed-Full “External Port” on one end and to “ZFH-TUE” emulator on other end
Connecting to the “ZFH-UTE” emulator
Working key data is being stored to the “ZFH-UTE” emulator
Try turning ignition on with “ZFH-UTE” emulator by touching the start/stop button with it.
Then click “Yes” to continue
Note:If the ignition won’t turn on,press “No” button then repeat the procedure,sometime it need try several times.
Press “Continue” to program a new key
Open driver’s side door,turn ignition on with “ZFH-UTE” then press “Continue” button
Hold the “ZFH-UTE” emulator close to the start/stop button.When the car chimes,take the key away from the start /stop button
Now hold the new key against the start/stop button where emblem side faces the button
When the car chimes twice take the ke away from the button
Now Zed-Full immobilizer is proceed,please wait
After then it will prompt key programmed successfully
Now you can test key on car.