This instruction will show you how to repair your damaged clear coat on your car. This only use basic tools so that you can do this yourself at home.
More painting cases please refer to:
How to Repair Old Peeling or Damaged Clear Coat by Yourselves
How To Paint Brake Calipers without Taking Off Any Bolts
Damage coat
Procedures:
Use Frog tape, masking paper to cover area you don’t want to spray
Then use 600grit and 1000 grit sandpaper which should be suitable for wet and dry applications sand the surface
When sanding, clean surface with some Trisodium phosphate and some water
After drying, spray Dupli-colors filler primer on surface to filling all those little scratches
Use 1000 grit sandpaper sand it after drying
Spray three coat Dupli-colors perfect match on the surface
Spray 2K clear coat, 10-15 minutes between coats, totally spray 4 coats
After 30 minutes, wet sand it with 2000 grit sandpaper.
Then use a machine Torq X by chemical guys, this is entry-level machine perfect for beginners.
Get three pads as well as some compound and polished samples by the chemical.
Also you can do same thing by hands.
You may have to do this two or three times until you get the results you want.
This is final result.
How to Use Hyster Yale PC Service Tool Password Management Function Note: To access…
When you use IDSS diagnostic scan to do some function,it may occur communication error.Sometime you…
Deutz engine EOL test (end of line) is required to ensure the EAT functionality. Conditions…
This instruction show you guide on how to solve Scania truck articulation control system ACS…
Magneti Marelli 49FB – Fiat ECU Pinout More ECU PINOUT Components: ECU Modules Repair…
After ECU reparogramming,it is necessary to write new engine number and machine ID into ECU.So…