This article will show you guide on how to use Zed-Full immobilizer solution to program keys for Renault Megane IV 2015+.
Procedures:
Locate OBD port,and plug Zed-Full to OBD port
Enter menu to select “OBD Application”
Select “Renault”
Now select “Megane”,then click “Continue” button
Select “Megane 4 15+”,click “Continue” button
Select “Card key”
For this Renault key programming,it will cost your credits,massage show as below,click “Yes” to continue
Enter total key count to have at the end of the procedure.
Turn ignition off,press “Start/Stop” button,also open driver side door
It will take you about 2 minutes to checking flash data,please wait
Press “Continue” button to precode new key to be programmed
Place new key into Zed-Full antenna and press “Continue” button
It will prompt you “Would you like to pre-code” another transponder?
Click “Not” to continue
Then place new key to be programmed to “Start/Stop” button on car and press “”Continue button
Successful
Now we place original working key to “Start/Stop” button on car and press “Continue” button
Successful
Now please wait. Saving log…it will take about 1 minutes
Now you can test all keys on your car.