This post show you guide on how to use Autel MX808 to perform DPF regeneration for Ford F350 super duty.More Ford repair cases,please check here:Ford Trouble Repair
Park vehicle with parking brake
Connect Autel MX808 to Ford F350,then select “Service”
Select “Hot Function”
Select “DPF(Diesel Particulate Filter) Manual Regeneration”
This procedures will command a DPF(Diesel Particulate Filer) regeneration
Perform the function as recommended in the service manual procedures.
Note:Manual DPF(Diesel Particulate Filter) regeneration may take up to one hour to complete
This test will increase the engine speed to a high RPM(Engine RPM) for an extended period of time.
Press “Yes” to continue
Now make sure met below conditions:
Vehicle is not moving
Vehicle is in PARK
Parking brake applied
Follow engine or crank for 5 seconds if engine does not start.
Note:Do not depress the throttle pedal.
Then Autel MX808 will show the DPF regeneration proceed as below
Just wait for DPF regeneration done.
Once the regeneration has been completed,the engine will return to the normal rpms.