How to Solve JCB AGCO Power K4714 Intake Air Pressure Out of Range

This instruction show you guide on how to repair JCB AGCO power trouble code K4714 intake air pressure out range error.More repair case for JCB,please refer to:JCB Trouble Repair

JCB Equipments K0125 Boost Pressure Deviation is too High Repair Guide


Related Content:

2023 AGCO EDT (Electronic Diagnostic Tool) v 1.123 v1.75 Free Download

WinEEM4s JCB Service Tool 2.7.2 2.6.1 Free Download

2024 JCB ServiceMaster 4 v24.3.1 Free Download for Win 10 Win11


The EEM monitoring system has detected that the intake 1 pressure sensor value is implausible.


Possible causes are:

The sensor wiring contact is loose.

The sensor wiring is defective.

The sensor is defective.


Reaction in EEM

The FC is stored and the warning lamp is activated. Engine power will be reduced (Degradation Level 3). The CAN message indicates active fault.



First save the error log and then erase it. Restart the ECU after erasing the error log. If the fault occurs again during the next driving cycle, check the following paths:

Check the intake 1 Boost and temperature sensor wiring, the connectors and the contact surfaces of the connector pins (possible oxidation).

Check the operation with another intake temperature and pressure sensor to see if the sensor is defective.

Visited 1 times, 1 visit(s) today