This short instruction will show you guide on how to flash steering column electronic via ODIS on VW.
Preparation:
Newest ODIS-E Engineering 17.0.1/12.2.0/9.0.1 Free Download
08.2023 VW ODIS 23.0.5 & 7.2.1 & 5.2.7 Diagnostic Software Free Download
How to Install ODIS-Engineering 12.1.0 Diagnostic Software
Steps:
Connect ODIS to vehicle OBD port, running software ODIS.
Click “0016 Steering Column Electronics”–>”001 Identification”
Click “042 Flash”
Choose “0016 Steering Column Electronics), then click “Local flash file”
Choose the file you need, open it
Start flashing, click “Yes”
Click “OK”
Would you like to clear all control module DTC memory entries? Yes
When results of flashing comes out, click “OK”
Function is completed.
If you are interested in more VW diagnostic cases, please click to VW DIAGNOSTIC SOFTWARE.
Here is the instruction show you guide on how to solve Deutz EMR3 engine fault…
This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…
Here is the instruction show you guide on how to install the left-hand drum bearing…
This instruction show you guide on how to remove and replace loader lift ram for…
This instruction show you guide on how to solve Caterpillar C9 engine 31 84-1 fault…
This instruction show you guide on how to charge and discharge accumulator for JCB 3CX,…