FIAT 2012 Throttle Body Self Learning Guide (Video)

I have written some article about Throttle show as below:

Jeep Wrangler Electronic Throttle Idle Learning Guide by X431

How to Adjust/Calibrate Throttle Position for Benz 212 2014

Ford F150 Throttle Response Adjustment (No Need Tools)

How To Clean Throttle Body By Yourself (Step By Step)

How to Remove & Install Auto Throttle Body

 

If you want to get the info about the,click to read for more detail.And today,I will write another article on how to perform throttle body self-learning for FIAT 2012.And I will put the video at end of article,watch the video gudie for more details.

 

Procedure of FIAT 2012 Throttle Body Self-learning:

 

Connect the X431 Pro to the vehicle,enter the menu and select the “FIAT”

Select FAT V34.62

FIAT series V34.62 ALL SYSTEMS

The software can diagnose the electric control system of FIAT series up to 2016,include engine/ABS/Airbag/Door lock/Immo/A.T./clinate control/instrumet panel

Communicating,please wait…

Select “Manually Select”

Select “New Model(Such as Freemont,500L,VIAGGIO,etc..)”

Select “500”

Select “2012”

Select “System Selection”

Roll down menu to select “Powertrain Control Module”

The the screen will show the version information.

Please pay more attention to the version,then select “OK”

Select “Special Function” it prompts that it will charge the status of the vehicle,press “OK”

Select “Misc Function”

The roll down the menu options to select “Throttle Body Self Learning”

It prompts that the ignition key should be in the run position with the egnine off.

It means that you turn your ignition to the “ON” position but do not start the engine.

Please wait…

It prompts that throttle body self-learning passed please log out.

 

FIAT 2012 Throttle Body Self-learning Video Guide:

auto

Recent Posts

How to Solve AGCO Machine Trouble Urea pressure too high?

This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…

2 days ago

How to Install Left-hand Drum Bearing Assembly for CLAAS LEXION 480

Here is the instruction show you guide on how to install the left-hand drum bearing…

2 weeks ago

How to Remove and Replace Loader Lift Ram for JCB 3CX 4CX Machine

This instruction show you guide on how to remove and replace loader lift ram for…

2 weeks ago

How to Solve Caterpillar C9 Engine Vehicle Speed Loss of Signal Error?

This instruction show you guide on how to solve Caterpillar C9 engine 31 84-1 fault…

3 weeks ago

How to Perform Accumulator Charging/Discharging for JCB 3CX,4CX

This instruction show you guide on how to charge and discharge accumulator for JCB 3CX,…

4 weeks ago

How to Solve PowerCommand PCC2300 Fault Code 143 Low Oil Rifle Pressure

This instruction show you guide on how to to solve PowerCommand PCC2300 trouble code 143…

1 month ago