This instruction show you guide on how to use Nissan ECU Reprogramming software to do Nissan ECU programming and reprogramming.
Preparations:
Nissan J2534 ECU Reprogramming NERS v4.03 v3.08 Free Download
Programming
Following steps have to be followed for performing Programming:
1.User selects pass-thru device and proceeds to “Functionality selection” screen.
2.Select functionality as “Programming”.
3.Supported ECU family names are displayed.
4.After selecting the ECU family – part number selection screen should be displayed with following information.
5.A grid will be displayed containing list of part numbers.
- Part number after reprogramming will be displayed as per selected part number in a grid.
- Reprogramming file name will be displayed as per selected part number in a grid.
- Size of reprogramming file will be displayed.
- Configuration part number will be displayed if auto configuration is supported for selected part number.
6.After selecting part number – Part number Information screen is displayed.
7.On click of “Start”.
a.For Q30/Qx30 vehicle & NISSAN UDS ECUs:
i.One edit box is displayed to the user to enter 17digit VIN.
ii.After VIN entry, user will be directed to Web Browser application for Authentication.
iii.Programing of ECU starts after successful Authentication.
b.For Cummins UDS, DDL2 ECM & Daimler ECUs: Programming of ECU starts on click of “Start”.
c.For Other vehicles:- 10 –
i.User will be directed to Web Browser application for Authentication.
ii.Programing of ECU starts after successful Authentication.
8.On completion of programming IGNITION OFF-ON OPERATION pop up is displayed.
9.On selecting OK, Programming Complete screen is displayed and configuration work log information is saved if ECU auto configuration is applicable.
Reprogramming
Following steps have to be followed for performing Reprogramming:
1.User selects pass-thru device and proceeds to “Functionality selection” screen.
2.Select functionality as “Reprogramming”.
3.Supported ECU family names are displayed.
4.After selecting the ECU family – part number selection screen should be displayed with following information.
5.A grid will be displayed containing list of part numbers.
- A grid will be displayed containing list of part numbers.
- Part number after reprogramming will be displayed as per selected part number in a grid.
- Reprogramming file name will be displayed as per selected part number in a grid.
- Size of reprogramming file will be displayed.
- Configuration part number will be displayed if auto configuration is supported for selected part number.
6.After selecting part number – Part number Information screen is displayed.
7.On click of “Start”.
a.For Q30/Qx30 vehicle & NISSAN UDS ECUs:
i.One edit box is displayed to the user to enter 17digit VIN.
ii.After VIN entry, user will be directed to Web Browser application for Authentication.
iii.Programing of ECU starts after successful Authentication
b.For Cummins UDS, DDL2 ECM & Daimler ECUs: Programming of ECU starts on click of “Start”.
c.For Other vehicles:
i.User will be directed to Web Browser application for Authentication.
ii.Programing of ECU starts after successful Authentication.
8.On completion of reprogramming IGNITION OFF-ON OPERATION pop up is displayed.
9.On selecting OK, Reprogramming Complete screen is displayed and configuration work log information is saved if ECU auto configuration is applicable.