BMW 530e G30 ZBE/CON Controller Coding by Launch X431 PAD VII

After replace the screen,if you find there is no functions,you need to do EDC damper statellite coding.This instruction show you guide on how to use Launch X431 PAD VII to perform ZBE/CON controller EDC damper satellite coding for for BMW 530e G30.For more repair case of BMW,please check BMW Trouble Repair.

BMW-530e-G30-ZBECON-Controller-Coding-by-Launch-X431-PAD-VII-1

 

Tool You Need:

Launch X431 PAD VII

 

Procedures:

Connect Launch X431 PAD VII to BMW 530e

BMW-530e-G30-ZBECON-Controller-Coding-by-Launch-X431-PAD-VII-2

Then power on Launch X431 PAD and automatically search vehicle identification

BMW-530e-G30-ZBECON-Controller-Coding-by-Launch-X431-PAD-VII-3

After scanning,go to “Coding/Program” option

BMW-530e-G30-ZBECON-Controller-Coding-by-Launch-X431-PAD-VII-4

Select “Coding”

BMW-530e-G30-ZBECON-Controller-Coding-by-Launch-X431-PAD-VII-5

It show the vehicle information,press “Next”

BMW-530e-G30-ZBECON-Controller-Coding-by-Launch-X431-PAD-VII-6

Scroll down to select “ZBE/CON(Controller)”

BMW-530e-G30-ZBECON-Controller-Coding-by-Launch-X431-PAD-VII-7

Select “S15A-18-07-546”,then wait coding processing

BMW-530e-G30-ZBECON-Controller-Coding-by-Launch-X431-PAD-VII-8 BMW-530e-G30-ZBECON-Controller-Coding-by-Launch-X431-PAD-VII-9

 

Recoding has been completed

BMW-530e-G30-ZBECON-Controller-Coding-by-Launch-X431-PAD-VII-10

Now go to system list to check the DTC in ZBE/CON controller,you will find there is no DTC.

More test report about Launch X431 please check:Launch X431 Test Report

(Visited 116 times, 1 visits today)