Here is the instruction show you guide on how solve Scania truck RTI 257 road transport informatics.
Error identification
The RTI unit does not start when the start button is pressed.
Related Contents:
2025.09 Scania SDP3 V2.66.2 V2.40 Diagnostic Software Free Download
Scania VCI3 Diagnostic Adapter Full Chips
2025 2018 Scania Multi EPC Parts Catalogue Free Download
Cause
The anti-theft device is probably activated.
The RTI unit has detected an incorrect chassis number via the CAN bus.
The RTI unit has been moved to a different vehicle without the new vehicle’s chassis serial number being registered via SDP3.
After the battery power to the vehicle has been cut, the RTI unit has been started before the vehicle’s starter key has been turned to the drive position. This means that the RTI unit has not received CAN data.
Notes
If the theft protection is activated, a red LED is lit on the front of the RTI unit.
Action
Turn the starter key. When the power is turned on, the CAN bus should receive vehicle identity data.
If the RTI unit is moved to a new vehicle, the unit must be unlocked by SDP3.
For more information about Scania truck,please refer to:Scania Trouble Repair.
Kubota L3301 L3901 Excavator Safety Valve Setting Pressure Test Using Injection Nozzle Tester 1 Remove…
JCB Engine Fault Derate When a fault is detected, the ECU determines the severity of…
Here is a instruction show you guide on how to solve Liebherr ECU 2 D966…
AGCO EEM5 DEF Suction Module Tank sensor (CAN) The DEF suction module with the CAN-bus…
This instruction show you guide on how to remove the threshing drum for CLAAS Lexion…
This instruction show you guide on how to display service menu for Hitachi ZX890-7 excavator.…