Heavy Equipment Repair

How to Solve Liebherr Machine Power or Speed Reduction?

How to solve Liebherr machine trouble code P1188 power or speed reduction emission related failure.

 

Related Contents:

2026 LIEBHERR LiDIA Diagnostic Software

Liebherr Diagnostic Tool with 9 Pin Cable

 

 

Reason:

Second step of inducement process activated

Second step of inducement process activation is the consequence of no suitable action performed during first step

 

Correct operation of the aftertreatment system is to be ensured by monitoring of :

  • Reagent level
  • Reagent quality
  • NOx emission values
  • Components necessary for proper operation of the SCR system

 

Inducement strategy activation is a consequence of one or multiple failures detected during the continuous monitoring

 

Troubleshooting:

Correct first the original failure leading to the activation of the inducement process

 

Important notice :

  • Inducement is deactivated when the conditions for its activation have stopped to exist : when original failure leading to the activation of the inducement process is corrected, inducement is deactivated
  • Inducement can not be automatically deactivated without the reason for its activation being corrected.

 

Consequence:

Main reactions :

  • Approx. 1 hour after first fault detection without any suitable correction, P1188-00 second stage of inducement strategy either reduces engine torque to 75% of the engine peak torque or limits the vehicle speed to 45mph.
  • The DEF indicator is blinking or constant red
  • The MIL indicator is blinking or constant on yellow
  • The driver is informed by a audio signal

 

Exemplary illustration of the reaction on the machine below. The precise reaction stays application and customer dependent

 

More repair case for Liebherr machine,please refer to Liebherr trouble repair

auto

Recent Posts

Doosan Machine Timeout Error of CAN Receive Frame AUXIO1

Here show you guide on how to solve Doosan machine Timeout error of CAN receive…

7 days ago

Liebherr Machine Emergency Stop-Ignition on While Emergency Stop is Active

This instruction show you guide on how to solve Liebherr machine emergency stop ignition on…

2 weeks ago

How to Solve Doosan Machine U043D CAN Receive Frame Counter Error

This instruction show you guide on how to solve Doosan machine trouble code U043D message…

3 weeks ago

AGCO Machine Trouble Code SPN 1485 – FMI 03 Solution

Here is the instruction show you guide on how to solve AGCO machine trouble code…

4 weeks ago

Detroit DD13 J1939 Wheel-Based Vehicle Speed Sensor Signal Missing

Detroit DD13 EPA10 (2010-13) trouble code SPN 84 FMI 13 (MCM) J1939 Wheel-based vehicle speed…

1 month ago

How to Solve Caterpillar C9 Vehicle Speed Signal Invalid?

This instruction show you guide on how to solve Caterpillar C9 engine trouble code 36…

1 month ago