This instruction show you guide on how to solve CAN communication engine control unit error fault on Scania truck.
Related Contents:
2025.05 Scania SDP3 V2.65.2 V2.40 Diagnostic Software Free Download
Scania VCI3 Diagnostic Adapter Full Chips
2025 2018 Scania Multi EPC Parts Catalogue Free Download
Error identification
No message or incorrect message from the engine control unit.
Cause
Unreliable CAN communication, fault on the CAN bus or fault on the engine control unit.
Notes
The control unit uses pre-programmed values to control the compressor. Regeneration takes place after each load relief operation. Yellow warning lamp comes on.
Action
Check if fault codes 185 and 313 are active or have been active. If they have not been active a fault in the CAN communication to the APS unit can be ruled out.
Check and rectify any faults in the engine control unit.
Check the CAN network to the engine control unit.
Check the CAN network to the APS unit.
For more information about Scania truck,please refer to:Scania Trouble Repair.
This instruction show you guide on how to solve Doosan machine trouble code U043D message…
Here is the instruction show you guide on how to solve AGCO machine trouble code…
Detroit DD13 EPA10 (2010-13) trouble code SPN 84 FMI 13 (MCM) J1939 Wheel-based vehicle speed…
This instruction show you guide on how to solve Caterpillar C9 engine trouble code 36…
Kubota L3301 L3901 Excavator Safety Valve Setting Pressure Test Using Injection Nozzle Tester 1 Remove…
JCB Engine Fault Derate When a fault is detected, the ECU determines the severity of…