Scania Truck Alarm System High and Low Supply Voltage ALM 256 257 Error

Here is the instruction show the simple steps on how to diagnose Scania truck alarm system high and low supply voltage ALM 256 257 error.

Related Contents:

2024.07 Scania SDP3 V2.61.2 V2.40 Diagnostic Software Free Download

 

Scania VCI3 Diagnostic Adapter Full Chips

2024 2018 Scania Multi EPC Parts Catalogue Free Download

 

 

Control unit, high supply voltage

Error identification

ALM control unit E7 has detected that its supply voltage has exceeded 36 V.

 

Cause

Fault in the alternator.

Incorrect connection of the battery.

Faulty ALM control unit.

Notes

–

Symptom

The control unit does not work.

 

Action

Check that the cable harness for the voltage supply is connected as per the electrical diagram.

Check the continuity in the cable harness between the battery and the ALM control unit with a multimeter.

Check the alternator.

If the fault is not in the voltage supply circuit or in the alternator, renew the ALM control unit.

 

 

Control unit, low supply voltage

Error identification

ALM control unit E7 has detected that its supply voltage has fallen below 16 V.

 

Cause

Fault in cable harness or harness-to-component connectors to ALM control unit E7.

Fault in the battery or alternator.

Faulty ALM control unit.

Notes

–

Symptom

The control unit does not work.

 

Action

Check that the cable harness for the voltage supply is connected as per the electrical diagram.

Check the continuity in the cable harness between the battery and the ALM control unit with a multimeter.

Check the alternator.

If the fault is not in the voltage supply circuit or in the alternator, renew the ALM control unit.

For more information about Scania truck,please refer to:Scania Trouble Repair.