How to Use NCS Expert Change VO for BMW E65

Car-auto-repair.com shared a guide on NCS Expert change VO for BMW E60 before,and now i will show you a step-by-step guide on how to use NCS Expert change VO for BMW E65,procedures are same,please follow before operations.

 

Preparations:

NCS Expert BMW Coding Software Download

NCS Expert program and coding guide

 

 

NCS Expert Change VO for BMW E65:

Before NCS can be used a Profile must be loaded.

Select File/Load Profile from top menu bar.

Select “Expertmode” the OK

Once a profile is loaded the bottom buttons become selectable

Select “F1” to read vehicle data first.

Select F3 to read FA from ECU.

This needs to be done before any coding can be performed.

Select the model you care working with.

For this example “E65”

Select “OK”

Choose the ECU to read the Vehicle Order from.

Here i select it from “CAS”,then click “OK” button

Then the vehicle information will show,include VIN and VO

Select “F2” to modify VO

Select the model you are working with

For this example “E65”,then click “OK” to continue

Verify the the VIN is correct

Note:Last digit is a checksum,and select “OK”

Enter SA or Service code ,then select “Add”

Enter FA,SA code must begin with $

Service Codes must begin with +

Example enter “$655”,select “Add”

Scroll down to check

Example enter “+EVER”,select “Add”

And scroll down to check,then click “OK”

After you have successfully,changed the VO you will see this screen

Select F6 (Back)

Select F4 to process ECU

Select “CAS”,then click “OK” to continue

Select F2 to change job

Select “FA_WRITE”

Verify Jobname is “FA_WRITE” and CAS is ECU selected

Select F3,execute job

Select F1,change ECU to select LM

This will ensure that new VO is written into CAS and LM

Select “LMA”,click “OK” to continue

Verify Jobname is “FA_WRITE” and LMA is ECU selected

Then select F3 to execute job.