Categories: Auto Repair

Bosch ADS625 Read & Clear DTCs for Volkswagen Passet GLS 2004

In this article,i will show you how to use Bosch ADS625 diagnostic tool to read and clear DTCs for Volkswagen Passet GLS 2.8L 2004.And in this example,we choose all system DTCS reading,it will scan all available controller on the selected vehicle.

 

Procedures:

1.Build connection between Bosch ADS 625 and vehicle,after ADS 625 identify the vehicle,select “Read DTCs”.

2.Select Read DTCs All Systems from the Screen,then click “Continue”

Note:Not all vehicle will have qualifiers

3.Scan progress will be indicated by the progress bar in the top of the screen

Note:If any of the controllers have DTC’s go to step 6.

4.Wait for scan to finish

Note: There is no arrow beside controller without a DTC and clicking on that line does nothing.

 

5.The controller without a DTC has no DTC line that is selectable and clicking on the line has no effect.

 

6.DTCs will be read from all available vehicle control-lers.

Select a listed DTC for Related Diagnostic Infor-mation See Diagnostic Information section

If a DTC has Code Criteria available there will be an “*” next to the DTC. Once completed the hand-set will display a list of all the DTCs found on the vehicle and group them by controller. If the hand-set was unable to communicate with a controller, it will be indicated under the specific controller. Communication problems on certain controllers may be attributed to the vehicle not having that controller. Controllers are sometimes listed for a particular vehicle that do not actually exist.

 

7.Now you can tap “Clear DTCs” button to clear diagnostic trouble code.

auto

Recent Posts

How to Solve Liebherr Machine Power or Speed Reduction?

How to solve Liebherr machine trouble code P1188 power or speed reduction emission related failure.…

5 days ago

Doosan Machine Timeout Error of CAN Receive Frame AUXIO1

Here show you guide on how to solve Doosan machine Timeout error of CAN receive…

2 weeks ago

Liebherr Machine Emergency Stop-Ignition on While Emergency Stop is Active

This instruction show you guide on how to solve Liebherr machine emergency stop ignition on…

3 weeks ago

How to Solve Doosan Machine U043D CAN Receive Frame Counter Error

This instruction show you guide on how to solve Doosan machine trouble code U043D message…

4 weeks ago

AGCO Machine Trouble Code SPN 1485 – FMI 03 Solution

Here is the instruction show you guide on how to solve AGCO machine trouble code…

1 month ago

Detroit DD13 J1939 Wheel-Based Vehicle Speed Sensor Signal Missing

Detroit DD13 EPA10 (2010-13) trouble code SPN 84 FMI 13 (MCM) J1939 Wheel-based vehicle speed…

2 months ago