In this instruction,car-auto-repair.com will show you guide on how to use AVDI diagnostics to do all keys lost programming for 2018 Range Rover Evoque.
Procedures:
Connect AVDI to OBDII port and laptop usb port
Connect PROTAG programmer to laptop usb port
Take TA54 ABRITES key for JLR
Open laptop and start Abrites Diagnostic for Land Rover software
Choose Gen2 Key Learning for Special Functions
Follow the on-screen instructions
Place TA54 key on PROTAG and wait a bit
It will take under a minute.
Function is done, now test your new key.
This instruction show you guide on how to solve Bobcat machine trouble code P18A5 suction…
The measured intake manifold pressure (signal from boost pressure sensor) is below the warning limit…
JCB 3CX 4CX Backhoe Loader engine throttle cable is routed from the L.H. side of the…
Here is the instruction show you guide on how to replace fuel tank breather filter…
FENDT 900 Vario COM III tractor Component B092 - Sensor, charge air pressure/temperature reports the boost…
Deutz EMR3 Engine Trouble Code 87 / 97 / FlFCD WATER IN FUEL Solution Error description…