This instruction show you guide on how to program keys for Toyota Avalon 2006-2012 by Tango programmer and Orange5 programmer.For more Toyota Key programming,please check here:Toyota Key Programming Projects
Preparations:
How to Install Orange 5 Software
Procedures:
Remove the smart box from Toyota Avalon
And clean the 93C86 EEPROM chip
Use heat gun to remove 93C86 EEPROM chip
Install 93C86 EEPROM chip on the adapter
And then install the adapter on Orange 5 programmer,show as below
Run Orange 5 software and select “93C86” chip type
Read and save original 93C86 chip data file on your PC
Run Tango software,and read the key type,it is ITS 94 type
Select vehicle brand “Toyota”–>”Smart System”–>”93C86″
Now upload the 93C86 EEPROM data file you saved on your PC
Here program the key in key 2 position
Click “Write specified type” and select “TMS37126”
Click “OK” to continue
Now save the new file on PC
Please make sure the key have been programmed
Now open Orange5 software and load the new file that generated by Tango software you saved just now.
And click write button to write this new file in to 93C86 EEPROM chip
After then solder 93C86 chip back on PCB and install smart box back on Toyota Avalon.
Detroit DD13 EPA10 (2010-13) trouble code SPN 84 FMI 13 (MCM) J1939 Wheel-based vehicle speed…
This instruction show you guide on how to solve Caterpillar C9 engine trouble code 36…
Kubota L3301 L3901 Excavator Safety Valve Setting Pressure Test Using Injection Nozzle Tester 1 Remove…
JCB Engine Fault Derate When a fault is detected, the ECU determines the severity of…
Here is a instruction show you guide on how to solve Liebherr ECU 2 D966…
AGCO EEM5 DEF Suction Module Tank sensor (CAN) The DEF suction module with the CAN-bus…