This illustration show the detail information of how to perform Volvo DICE full test by mean of DICE test unit.
DICE Full Test by Mean of DICE Test Unit:
1.Find the DiCE Test Unit
2.Power up the DiCE by connecting 12 V DC, part number 9513004, to the DiCE Test Unit. NOTE! The power LED should now be lit.
3.Connect the DiCE to the DiCE Test Unit. NOTE! The vehicle interface status LED is now lit (firm red light).
4.Start VIDA All-in-one. Select the START tab.
5.Click on PERFORM COMPUTER SETTINGS and then the COMMUNICATION TOOL tab.
6.Click on the dots beside the DiCE option in the drop-down list for the COMMUNICATION TOOL.
7.In the DiCE unit drop-down list, select the appropriate DiCE and click the Test communication tool.
8.Click on RUN
9.Set the DiCE Test Unit Switch to position 1. Click on OK.
10.Set the DiCE Unit Switch to position 2. Click on OK. Click on CLOSE.
11.CONGRATULATIONS! You have successfully managed to perform a DiCE Full Test by means of DiCE Test Unit.
12.If this will not work, the following will be shown:
Please check thouroughly the switch positions and try again. If it still does not work, the DiCE Unit is out of order and has to be replaced.
Repeat this section for both DiCE connected via USB and Bluetooth.