In this instruction,i will show you how to change oil for Toyota Camry 2007.This oil change method can apply to 2005 to 2010 Toyota Camrys.
What you Need?
Toyota Engine Oil (4 quarts)
Locate support bar,and then you are going to put the jack underneath it.
Note:Make sure to pull your E-brake before you jack the vehicle up
Then we need o drain the oil,and it need a 14 millimeter wrench,a bucket oil pan
Slide the bucket oil pan under the front of the car
This is what you need to remove on the oil pan.
Now we need to use 14 millimeter to remove the bolt
Let oil drink to bucket oil pan
Unscrew oil pan out
Locate the oil filter
Now prepare the tool to remove oil filter:3/8 inch wrench with extension
Put the remove tool adapter on the oil filter,
And you are going to turn it lefty loose
Now install the new oil filter
Note:Do not forget to check the old filter to make sure the O-ring is on the filter and not left on the vehicle.Some times they get stuck to the bottom of the oil filter assembly.
Now we need to put oil pan nut back on the oil pan
Start filling oil up
After you fill up your oil,just put the oil cap back
And now we are going to check oil on level ground with the dipstick.
After checking your oil on level ground,run the vehicle for 5 mins,turn vehicle off and let sit for 5 more minutes,then recheck the oil again to make sure the levels have not dropped.If they have dropped closer to the bottom line just add more.