Vediamo Coding for Mercedes Benz Turn Signal Flasher Changed from 3x to 5x

In this instruction,car-auto-repair.com will show you guide on how to use Vediamo to code for Mercedes Benz change turn signal flasher from 3x to 5x.

 

Preparation:

Benz Vediamo 5.01.01 +Path+Database Mercedes Free Download

How to Install Mercedes Benz Vediamo Software

 

1.Carlines:117 156 166 W176 W246 C292 463

ECUs: CBC.CBF-pre facelift CBCBOLERO.CBF-Facelift The best and easiest way is to do it with by manual coding.

 

2.Carlines:172 190 197 197_ECELL 204 207 212 218231

ECUs: SAMF _172. CBF SAMF_204. CBFSAMF_212. CBF Secure access needed before coding Eeprom write needed after coding Hard reset should be done after coding Procedure:

1.SAM-F save/backup codings –>choose folder and filename

2.Choose, VCD_Parameter_Fahrtrichtungsanzeiger”

3.Click, Tippblinken_anzah”

4.Change from 3to 55. Click SG_codieren

3.Carlines:w213

ECU: BC_F213.smr-d Service 1206 olc brinker _modell_write Pbmm_anz_tb3>>5

This has taken out of the forum.

Could not even validate at the loaded smr-d.

 

4.Carlines:w205 217 222 w253

ECU: BC_F222. smr-d Service 1206 olc brinker _modell_write Pbmm_anz_tb3>>5

This has taken out of the forum.

Could not even validate at the loaded smr-d.

-Connect to BCf222

-go to 1206 olc brinker_modell_write

-Pbmm_anz_tb: default is 3. change to what you want..(1~254)

-code ecu