Some freshman have on idea of Steering Angle Sensor,and they do not know how to locate steering angle sensor,this short article just for purpose to introduce steering angle sensor location and how to remove steering angle sensor.
The Steering Angle Sensor also short called SAS,it a important component of ESC system to measure the rate of turn and steering wheel position angle.The steering angle sensor can measure the steering wheel position when you turn wheel right or left and the steering angle sensor transmit data to auto electric control unit to make ECU provide steering instructions correctly.
The SAS is located in a sensor cluster in the steering column.(Show as below picture,the second diagram diagram with #3 being the steering angle sensor)
How to remove steering angle sensor?
Read Steering Angle Sensor Removal Guide on Mercedes Benz C230,difference vehicle model removal of steering angle sensor are much the same.
How to reset steering angle sensor:
How to Reset Steering Angle Sensor?
This instruction show you guide on how to solve Bobcat machine trouble code P18A5 suction…
The measured intake manifold pressure (signal from boost pressure sensor) is below the warning limit…
JCB 3CX 4CX Backhoe Loader engine throttle cable is routed from the L.H. side of the…
Here is the instruction show you guide on how to replace fuel tank breather filter…
FENDT 900 Vario COM III tractor Component B092 - Sensor, charge air pressure/temperature reports the boost…
Deutz EMR3 Engine Trouble Code 87 / 97 / FlFCD WATER IN FUEL Solution Error description…