Opel DPF Forced Regeneration Manually by OPCOM VAXU-COM

Here car-auto-repair.com share the guide on how to use OPCOM to forced DPF regeneration for Opel vehicles.

 

Preparations:

Newest OPCOM VAUX-COM All Version Free Download

OPCOM Clone

 

You can start the forced regeneration on the following models:

Astra-H

• Z19DT, Z19DTH, Z19DTL, Z17DTR, Z17DTJ

Zafira-B

• Z19DT, Z19DTH, Z19DTL, Z17DTR, Z17DTJ

Vectra-C / Signum

• Z19DT, Z19DTH, Z19DTL

Corsa-D

• Z13DTH, Z17DTR

Antara

• 2.0L Diesel engine

Warning

The exhaust gas temperature will increase to over 600 °C, so you must perform this outside,

on a non-flammable ground.

The regeneration procedure is completely controlled by the engine control unit.

Prerequisites

• Engine is running at idle
• Engine is fully warmed up
• To avoid consequential damages, the DPF regeneration must be executed only once!

 

EDC16 System

 

Note, after “DPF Regeneration” is finished live data “Diesel Particulate Filter Saturation” will show 70%. When engine controller has performed a dynamic regeneration value will be changed.

 

DECE01 System