In this instruction,i will show you guide on how to use Launch X431 Torque to change the auto light logic setting on a 2004 Nissan Sentra.Here for more Launch X431 test projects,please check:How to use Launch X431.
Procedures:
Connect Launch X431 Torque to Nissan Sentra OBD port,then enter menu to select [Nissan]
To confirm the software,select [OK]
Select [The Vehicle With 16 PIN]
It will show you VIN,chek and select [OK]
Select [Automatically Search]
Confirm VIN,model,year and select [OK]
Select [System Selection]
Select [BCM(Body Control Module)]
System info will show you,just select [OK]
Then select [Special Function]
Select [Auto Light Logic Set]
The different mode options are at the button at the screen.
The value will change when a selection is made.
To save the setting press the back button
Back to select [Auto Light Logic Set]
Select [Mode4] to change to Mode4
Repeat change all mode option list from Mode1 to Mode6
Once complete,select [OK]
And this is how to change the Auto Logic setting on a 2004 Nissan Sentra
How to Use Hyster Yale PC Service Tool Password Management Function Note: To access…
When you use IDSS diagnostic scan to do some function,it may occur communication error.Sometime you…
Deutz engine EOL test (end of line) is required to ensure the EAT functionality. Conditions…
This instruction show you guide on how to solve Scania truck articulation control system ACS…
Magneti Marelli 49FB – Fiat ECU Pinout More ECU PINOUT Components: ECU Modules Repair…
After ECU reparogramming,it is necessary to write new engine number and machine ID into ECU.So…