Categories: Do It Youself

How to update Audi MMI 3G Firmware

Here comes the guide on how to update Audi MMI 3G firmare.Follow this guide you need to know try it at you own risk.

 

Caution:If your system already had another activator(like Carson’s one) we recommend making an emergency update before doing anything else.

 

Related Contents:

How to Update Audi MMI Map

How to Active Audi MMI Map:3G &3 GP

How to Enable Audi MMI Green Menu (Hidden Menu) by VCDs & Script

 

Audi MMI 3G Firmware Download:

https://mega.nz/#F!BdV1FADa!M35If02OSTILODgcBLVvvw

 

How to update Audi MMI 3G Firmware:

Format your SD in FAT 32

Copy the root of your firmware in the SD(like picture below)

Open “Engineering Menu”

MMI 2G SETUP+RETURN
MMI 2G(A8) TEL+RETURN
MMI 3G SETUP+RETURN
MMI 3GP CAR+BACK
MMI 3GP(A1) BACK+TONE
RMC(A1/Q3) BACK+TONE
RMC(A6+A7) CAR+BACK
MIB BACK+Top Left Button

 

A screen like this will appear

Insert the SD card with the firmware in slot 1

Press the “Update” option using the MMI Control Panel

Scroll down with the big knob and select the source in the menu(SD 1) press it.

Select the firmware pressing the big knob once

 

Caution:Some users report problems with bose sound system,if you have bose and don’t know how to recode it… we recommend unselect it from list(using User-Defined Mode) before updata

If you update it,you will have to visit an expert or your dealer for recode it.If you can,we recommend update it,just because it sounds better.

 

Select “Standard”

You will see a list with all devices that firmware will update

Scroll to bottom and press “Start Update” or “Start Download”

Another screen appears informing you that once you start updating this must not be interrupted.Select “Start” and press the big knob.

The MMI will reboot and the update process will start

After several minutes/hours(it depends that what it has to update and the speed of your SD) the firmware update will be done.

Aresume with all updated modules will appear.Scroll down and press “Continue”

Select “Cancel documentation“ and the MMI will reboot

auto

Recent Posts

MANITOU MT6034 Telehandlers PWP System Deactivation Tests

This instruction show you guide on how to do deactivation test for MANITOU MT6034 telehandlers…

3 days ago

How to Solve Liebherr Machine ECU2 P1119 SCR System Plausibility Error

This instruction show you guide on how to solve Liebherr machine ECU2 P1119-00 trouble code…

5 days ago

Bobcat Machine P18A5 Suction Line Heater Open Error Solution

This instruction show you guide on how to solve Bobcat machine trouble code P18A5 suction…

1 week ago

AGCO Machine SPN 102 – FMI 31 Intake Manifold Pressure Drop Too High at Cranking

The measured intake manifold pressure (signal from boost pressure sensor) is below the warning limit…

2 weeks ago

JCB 3CX 4CX Backhoe Loader Engine Throttle Cable Removal and Replacement

JCB 3CX 4CX Backhoe Loader engine throttle cable is routed from the L.H. side of the…

2 weeks ago

How to Replace Fuel Tank Breather Filter Element for Liebherr R9600 Excavator

Here is the instruction show you guide on how to replace fuel tank breather filter…

1 month ago