This instruction will show you 3 ways to turn off engine light in 1 minute on Toyota.
The first method is by OBD scanner tool. After reading the code and fixing the problem, you can erase the code and check engine light will turn off.
The second method is disconnect negative battery terminals, then connecting it back again.
It will reset the ECU electronic control unit. The downside of this method, the dash clock will be reset and on some cars the radio channels will be erased as well.
The last method is much easier and it only takes you few seconds without needing any tools. And the radio channels and the dash cam will remain as it is.
Remove the fuse box cover and look for ECU electronic control unit
Or on some cars is ECM electronic control unit
Remove the fuse and put it back
It will reset the ECU and turns off check engine light
After fixing a problem do that, if you had a bad fuel injector or oxidized connection.
More information about check engine light, please visit to HOW TO SOLVE CHECK ENGINE LIGHT ON?
This instruction show you guide on how to solve Doosan and Bobcat Electric problems can…
It is necessary to do driver installation for JCB DLA 2.0 diagnostic kit,otherwise it can…
Here is the instruction show you guide on how to solve Deutz EMR3 engine fault…
This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…
Here is the instruction show you guide on how to install the left-hand drum bearing…
This instruction show you guide on how to remove and replace loader lift ram for…