This instruction will show you how to take the fuel injectors out on 2017 Toyota Camry. It will be the same for 2015-2017 models.
You can also follow this link How to Clean Fuel Injection without Dissembling to clean fuel injectors.
Procedures:
The fuel injector located at the back of the engine, bolted on the engine with 2 12mm bolts.
Remove the filter box and throttle hose.
Disconnect the airflow sensor harness and undo the 10mm clamp
After taking the throttle hose off, put a glove on a throttle in case anything drop in.
Put a rag under the fuel line for absorbing dripping fuel for disconnecting fuel line take the cover off
We need a fuel line disconnected tool, you can find it on Amazon or DIY.
This is a 5/16 an inch, 8mm fuel line disconnected tool
Push tool in and it will slide right off
Undo harness bracket bolts, there are 3 10mm bolts
Unscrew these 2 12mm bolts
Disconnect fuel injector connectors and gently pulled out
be careful when you take the fuel rail out, don’t lose these spacers
and also be careful from these fuel injector O-rings because sometimes they will come out when you take the fuel injectors out. This is how it looks like.
More cases about Toyota Camry, please refer to Toyota Camry.
JCB Engine Fault Derate When a fault is detected, the ECU determines the severity of…
Here is a instruction show you guide on how to solve Liebherr ECU 2 D966…
AGCO EEM5 DEF Suction Module Tank sensor (CAN) The DEF suction module with the CAN-bus…
This instruction show you guide on how to remove the threshing drum for CLAAS Lexion…
This instruction show you guide on how to display service menu for Hitachi ZX890-7 excavator.…
Here is the instruction show you guide on how to do Advanced Tool Select and Basic…