This short instruction will show you guide on how to reset oil life maintenance light when you change your oil but forgot to reset the maintenance light. This operation also applies to 2015-20 Cadillac Escalade.For more repair case about Cadillac,please check here:Cadillac Repair Cases.
Procedures:
Running Engine. We’re going to use the gauge cluster.
Press over to the side
The light up comes all the way to the left.
Once it’s all the way over there, you can continue by scrolling up and down until you find oil life maintenance.
Once you find that, go ahead and hold the select button.
Then that’s going to reset the oil life.
Turn off the engine and turn it back on again. Just ensure that it is actually reset.
Now you’re safe to take it for a road test.
Detroit DD13 EPA10 (2010-13) trouble code SPN 84 FMI 13 (MCM) J1939 Wheel-based vehicle speed…
This instruction show you guide on how to solve Caterpillar C9 engine trouble code 36…
Kubota L3301 L3901 Excavator Safety Valve Setting Pressure Test Using Injection Nozzle Tester 1 Remove…
JCB Engine Fault Derate When a fault is detected, the ECU determines the severity of…
Here is a instruction show you guide on how to solve Liebherr ECU 2 D966…
AGCO EEM5 DEF Suction Module Tank sensor (CAN) The DEF suction module with the CAN-bus…