Categories: Auto Repair

How to Replace Cabin Air Filter for 2015 Mercedes-Benz GLK350

This instruction will show you guide on how to replace cabin air filter for 2015 Mercedes-Benz GLK350. The cabin filter is located on the passenger side of the vehicle, under the glove box.

 

Time: 30-60 minutes

Tab: $23 to $50

Talent: 1

Tools: T20 Torx driver, rag

Parts Required: New air filter

Hot Tip: Place a cloth under the filter when removing

Performance Gain: Breathing cleaner air

Complementary Modification: Change engine air filter

 

Steps:

Use a T20 Torx bit remove the three Torx screws that secure the foot panel to the glove box assembly.

Pull the flooring backwards so you can remove the sealing panel easier

Remove the footwell ceiling panel

The filter is secured by a plastic lock and sometimes metal clips on either end. Pry those off it.

Slide the plastic lock to the left to drop the filter.

Remove the old filter from the housing and clean out any debris inside.

Install you new AQ 1161 C filter into the housing with its air flow indicating arrow pointing towards the back of the car.

Slide securing plastic over the housing tabs to lock it.

Reinstall other parts, replacement is finished.

Recommended replacement every 15,000 miles or one year, refer to your vehicle owners manual for specifications.

 

More Benz repair projects, please refer to BENZ TROUBLE REPAIR.

Kevin

Recent Posts

Magneti Marelli 49FB – Fiat ECU Pinout

Magneti Marelli 49FB – Fiat ECU Pinout   More ECU PINOUT Components: ECU Modules Repair…

13 hours ago

How to Write Engine and Machine ID into ECU for Doosan DL06

After ECU reparogramming,it is necessary to write new engine number and machine ID into ECU.So…

2 days ago

PCC1302 PowerCommand Low Coolant Level (Warning or Shutdown) Solution

PCC1302 PowerCommand Low Coolant Level (Warning or Shutdown) Solution   Related Contents: 2024 InPower V14.5…

3 days ago

Volvo 2017 Engine Emissions ACM P054415 Exhaust Gas Sensor Error

The function identifies the exhaust temperature and indicates malfunction in the exhaust system. The evaluation…

7 days ago

How to Use MTU DiaSys Diagnostic Software to Connect MTU Engine

MTU DiaSys diagnostic software is professional on MTU engine diagnostics and programming.But seems that is…

1 week ago

Cummings ISX 12 and 15L EPA7 Engine Aftertreatment Injector Flow Test by JPRO

This instruction show you guide on how to use JPRO Diagnostic to do aftertreatment injector…

1 week ago