Categories: Auto Repair

How to Repair BMW F Series Power Assisted Steering Fails Trouble

The power-assisted steering fails with a warning lamp in the instrument cluster or a check control message in the Central Information Display. In some cases, the Dynamic Stability Control warning lamp (DSC) in the instrument cluster may also be illuminated.More repair cases about BMW,please check here:BMW Trouble Repair

 

MODEL

F22 (2 Series Coupe)

F30 (3 Series Sedan)

F31 (3 Series Sport Wagon)

F32 (4 Series Coupe)

F34 (3 Series Gran Turismo)

F36 (4 Series Gran Coupe)

F80 (M3 Sedan)

F82 (M4 Coupe)

F83 (M4 Convertible)

 

CAUSE

Failure of the power-assisted steering may be caused by various software-related issues.

The following codes may be stored in the fault memory of the Electric Power Steering (EPS):

Scenario 1: 0x4823E1

Scenario 2: 0x4823CB/0x4823CC

Scenario 3: 0x4823D2 and/or 0x4823EC

Scenario 4: 0x48239C (DSC warning lamp lights up in the instrument cluster)

Scenario 5: No communication with the EPS is possible (not accessible using diagnostics)

Scenario 6: 0x4823EE and 0x4823C2

 

CORRECTION

Run diagnostics with the latest version of ISTA/D to read stored fault codes

Scenario 1: (0x4823E1)

Program the vehicle with ISTA/P 2.51.2 (target I-Level F020-13-11-502), or a more recent version.

Scenario 2: (0x4823CB / 0x4823CC)

Program the vehicle with ISTA/P 2.52.0 (target I-Level F020-14-03-502), or a more recent version.

Scenario 3: (0x4823D2 and/or 0x4823EC)

Program the vehicle with ISTA/P 2.51.2 (target I-Level F020-13-11-502), or a more recent version.

Scenario 4: (0x48239C)

For this fault code memory, the DSC warning lamp lights up in the instrument cluster. The power-assisted steering is working, but the DSC is not fully functional (although ABS is still operational). Program the vehicle with ISTA/P 2.51.2 (target I-Level F020-13-11-502), or a more recent version.

Scenario 5: (No communication with the EPS possible)

The vehicle cannot communicate with the EPS (not accessible using diagnostics). Disconnect the battery for at least ten minutes and then reconnect it. The EPS is then accessible again. Then program the vehicle using ISTA/P 2.52.0 (target I-Level F020-14-03-502), or a more recent version.

Scenario 6: (0x4823EE and 0x4823C2)

Perform the “Starting Steering” test plan (AT3244_EPS_ZF1_INBTR) from the Service Functions and then switch the ignition off and on again. Read the fault code memory again, and then clear it. Do not replace the EPS unit for this condition.

Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software. For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle Programming.

Always connect a BMW approved battery charger/power supply

2024.08 BMW Rheingold ISTA+ 4.48.40 4.23.14 ISTA-P 3.71 Free Download

auto

Recent Posts

Doosan Machine Timeout Error of CAN Receive Frame AUXIO1

Here show you guide on how to solve Doosan machine Timeout error of CAN receive…

7 days ago

Liebherr Machine Emergency Stop-Ignition on While Emergency Stop is Active

This instruction show you guide on how to solve Liebherr machine emergency stop ignition on…

2 weeks ago

How to Solve Doosan Machine U043D CAN Receive Frame Counter Error

This instruction show you guide on how to solve Doosan machine trouble code U043D message…

3 weeks ago

AGCO Machine Trouble Code SPN 1485 – FMI 03 Solution

Here is the instruction show you guide on how to solve AGCO machine trouble code…

4 weeks ago

Detroit DD13 J1939 Wheel-Based Vehicle Speed Sensor Signal Missing

Detroit DD13 EPA10 (2010-13) trouble code SPN 84 FMI 13 (MCM) J1939 Wheel-based vehicle speed…

1 month ago

How to Solve Caterpillar C9 Vehicle Speed Signal Invalid?

This instruction show you guide on how to solve Caterpillar C9 engine trouble code 36…

1 month ago