Categories: Auto Repair

How to Remove Wheel Locks Without a Key Tool

There is a problem once you lost the key to your wheel lock or locking lug nuts. This instruction will show you how to remove wheel locks without a key tool, we’ll demonstrate on our Chevrolet Equinox. Keep in mind this methods is a little destructive, please do that on you own vehicle or have permission from the owner. And please do not use that to steal somebody’s wheels!

 

Procedures:

Prepare a 13/16 or 19mm-22mm socket , anyway it need to be smaller than the outside of the lock nut.

Hold socket and hammer it in

When it was tighten enough, take it out

Now we need to release the lock nut from the socket

Take a bigger socket over vise, let lock nut to go in, get a bolt that fits inside and hammer it in until nut falls off the socket

 

More method to remove locks lug nuts, please click here: How to Remove a Locking Lug Nut Without the Key

Kevin

Recent Posts

Doosan Bobcat Machine Electric Fault Troubleshooting Guide Tip

This instruction show you guide on how to solve Doosan and Bobcat Electric problems can…

4 days ago

How to Download and Install JCB DLA 2.0 Driver?

It is necessary to do driver installation for JCB DLA 2.0 diagnostic kit,otherwise it can…

1 week ago

How to Solve Deutz EMR3 Engine 94 /523239/FrmMngDecV1?

Here is the instruction show you guide on how to solve Deutz EMR3 engine fault…

2 weeks ago

How to Solve AGCO Machine Trouble Urea pressure too high?

This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…

2 weeks ago

How to Install Left-hand Drum Bearing Assembly for CLAAS LEXION 480

Here is the instruction show you guide on how to install the left-hand drum bearing…

4 weeks ago

How to Remove and Replace Loader Lift Ram for JCB 3CX 4CX Machine

This instruction show you guide on how to remove and replace loader lift ram for…

1 month ago