This instruction show you guide on how to remove and install inspection lamp socket for Scania L,P,G,R,S series truck after 2016.
Related Contents:
2024.07 Scania SDP3 V2.61.2 V2.40 Diagnostic Software Free Download
2023 2018 Scania Multi EPC Parts Catalogue Free Download
Procedures:
Removal – Socket for inspection lamp
1.Open the front grille panel.
2.Remove the cable ties.
Disconnect the connector.
3.Remove the 2 screws and remove the inspection lamp socket.
Fitting – Socket for inspection lamp
1.Fit the inspection lamp socket using the 2 screws.
2.Open the front grille panel.
3.Fit the connector.
Attach the socket cable using cable ties.
4.Close the front grille panel.
FENDT 900 Vario COM III tractor Component B092 - Sensor, charge air pressure/temperature reports the boost…
Deutz EMR3 Engine Trouble Code 87 / 97 / FlFCD WATER IN FUEL Solution Error description…
This instruction show you guide on how to perform hydraulic flow test for Kubota L3301…
This instruction show you guide on how to configure Lane Departure Warning for Bendix AutoVue…
This instruction show you guide on how to solve AGCO machine SPN102 FMI03 boost pressure…
Here is the instruction show you guide on how to solve Scania Truck ATA 152…