This instruction will show you guide the way to remove every different wheel locks without a key.
Here is same topic article for further reference:
How to Remove the Locking Lug Nuts without Key for 2008 Volvo XC70
How to Remove Wheel Locks Without a Key Tool
How to Remove a Locking Lug Nut Without the Key
Method #1
Hammer a 12 point metric socket over the wheel lock
It doesn’t work for this two type wheel lock
Method #2
Buy a suitable locking wheel nut removal tool from autozone
it reversed threads and suck that bite into the lug, as you loosen it.
It doesn’t work perfect for this type wheel lock, noted it is definitely ruined the wheel and probably ruined the lock when you take it out.
Method #3
Grinding two flats to be able to get a wrench on there
Used a very heavy open end wrench and mount it
Method #4
Use a nut and weld the inside to the top of the lock nut to avoid waste a socket
It’s not very food for wheel but it does work
JCB 3CX 4CX Backhoe Loader engine throttle cable is routed from the L.H. side of the…
Here is the instruction show you guide on how to replace fuel tank breather filter…
FENDT 900 Vario COM III tractor Component B092 - Sensor, charge air pressure/temperature reports the boost…
Deutz EMR3 Engine Trouble Code 87 / 97 / FlFCD WATER IN FUEL Solution Error description…
This instruction show you guide on how to perform hydraulic flow test for Kubota L3301…
This instruction show you guide on how to configure Lane Departure Warning for Bendix AutoVue…