Categories: Auto Repair

How to Remove 93C56 Chip for Dacia Daster 2010

You need remove 83C56 chip from dashboard from instrument cluster,if you need to do odometer correction.So here is the guide on how to remove 93C56 chip for Dacia Daster 2010.

 

Here are collection information for dashboard work:

DashBook Pro v7.9+SRSBook 1.4 2018 Removal Book 100% Work Solution

 

Procedures:

Removing the instrument cluster

Remove trim steering shaft.

To do this,unscrew the 2 screws

Unscrew the 2 screws and remove the instrument panel trim.

To remove the instrument panel,unscrew the 4 screws

Remove the connectors and remove the instrument cluster

 

 

Dismantling the instrument cluster

Loosen the screws and remove he rear plastic cover.

Squeeze the plastic latches,remove the front cover,along with a combination of glass.

Carefully remove the arrows.

 

Connect the instrument cluster

In-system programming

 

Dumps

Keep the original dump

11

auto

Recent Posts

Doosan Bobcat Machine Electric Fault Troubleshooting Guide Tip

This instruction show you guide on how to solve Doosan and Bobcat Electric problems can…

7 hours ago

How to Download and Install JCB DLA 2.0 Driver?

It is necessary to do driver installation for JCB DLA 2.0 diagnostic kit,otherwise it can…

6 days ago

How to Solve Deutz EMR3 Engine 94 /523239/FrmMngDecV1?

Here is the instruction show you guide on how to solve Deutz EMR3 engine fault…

1 week ago

How to Solve AGCO Machine Trouble Urea pressure too high?

This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…

2 weeks ago

How to Install Left-hand Drum Bearing Assembly for CLAAS LEXION 480

Here is the instruction show you guide on how to install the left-hand drum bearing…

3 weeks ago

How to Remove and Replace Loader Lift Ram for JCB 3CX 4CX Machine

This instruction show you guide on how to remove and replace loader lift ram for…

4 weeks ago