Bosch ME7.9.7 ECUs are equipped on many old China cars,like brands Greatwall,Changean,Cherry,Haima,Dongfeng.So here is a guide on how to disable immobilizer system for Bosch ME7.9.7.
Procedures:
Remove BOSCH ECU ME7.9.7 and then remove cover
Connect KTAG to ECU 7.9.7
Run KTAG software
Select “ST10FXXX”à”BOSCH ME7.9.71 ROVER/DR 419”
You will get 3 files
A file format file for Ktag
A EPR file for EEPROM
A mpc file for flash
For BOSCH ME7.9.7,here we only need mpc FLASH file.
Use hexworkshop software to edit FLASH file
Search “47F8FF003D0B”
Change it to “47F8FF000D0A”
Save modified file,then use KTAG write FLASH file back to ECU,and install ECU on car
You will find IMMO off.
It is necessary to do driver installation for JCB DLA 2.0 diagnostic kit,otherwise it can…
Here is the instruction show you guide on how to solve Deutz EMR3 engine fault…
This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…
Here is the instruction show you guide on how to install the left-hand drum bearing…
This instruction show you guide on how to remove and replace loader lift ram for…
This instruction show you guide on how to solve Caterpillar C9 engine 31 84-1 fault…