After you retrofit BMW EVO head unit from small to big screen,you need to coding the value to make it valid.So here i will show you guide on how to use E-sys to do BMW EVO head unit upgrade 6.5” screen to 8.8-10.2”.
Preparations:
BMW E-sys 3.33.0/3.32.1/3.30.01 Coding Software Free Download
How To Use BMW E-sys Coding Software
E-SYS BMW Coding Functions List
BMW E-sys program BMW F-series FA Guide
How to Use BMW E-sys to Set Up Router or DHCP Server for KOMBI and NBT
Procedures:
Connect ENET cable on BMW obd port,then run E-SYS software.
Search “DISPLY_VARIANTE”
Change value “schmales_display” to “breites_display”
Search “DISPLAY_SIZE_RESOLUTION”,change value to 8.8 or 10.25
And change CID_display_res to 1280_480
It is necessary to do driver installation for JCB DLA 2.0 diagnostic kit,otherwise it can…
Here is the instruction show you guide on how to solve Deutz EMR3 engine fault…
This instruction show you guide on how to solve AGCO machine trouble code 138 SPN…
Here is the instruction show you guide on how to install the left-hand drum bearing…
This instruction show you guide on how to remove and replace loader lift ram for…
This instruction show you guide on how to solve Caterpillar C9 engine 31 84-1 fault…