Categories: Excavator Repair

How to Change Coolant for Volvo EC55D AG Compact Excavator

This instruction show you guide on how to change coolant for Volvo EC55D AG compact excavator.

 

Related Conetents:

2024 Volvo  TechTool PTT 2.8.241 APCI 0.7.1.0/2.7.116 All Version Free Download

Volvo PROSIS 2023 2019 2018 Parts Catalog & Repair Manuals Free Download

Volvo Diagnostic Kit (88890300)

Volvo VOCOM 88890300 Diagnostic Kit

 

Procedures:

Before removing the radiator cap, stop the engine and let it cool down sufficiently. When removing it, turn it slowly to release the pressure.

NOTE!

Volvo Coolant VCS must never be mixed with any other coolant or corrosion protection to avoid damage to the engine.

Place the machine in the service position B, See Service positions.

Draining coolant

Open the engine hood.

Remove the radiator cap slowly.

 

Risk of scalding and burns when the expansion tank cap (radiator cap) is opened due to high pressure in the cooling system.

Open coolant drain valve and drain all coolant into a suitable container.

NOTE!

Prepare a suitable container.

NOTE!

The cooling system is not protected from freezing after draining. There may still be pockets of coolant in the system.

NOTE!

Handle and take care of waste oil/fluids in an environmentally safe manner.

 

Refilling coolant into drained cooling system

NOTE!

Volvo Construction Equipment concentrated coolant with anti-freeze must not be mixed with other brands of anti-freeze or additives as this type of mixture could have negative effects.

NOTE!

Anti-freeze must always be used, see Section 1, Coolant with freezing and corrosion protection, Section S.

Refill coolant through the filling port on the top of the radiator

NOTE!

Cooling system refill volume: see Lubricants and filling capacities.

Start and run the engine to operating temperature and top up with coolant so that the cooling system is completely filled with coolant and is free of air.

Check the coolant level after the engine has been run to operating temperature and then cooled down.

NOTE!

Never fill or top up the cooling system with cold coolant when the engine is warm. This can cause cracking of the engine block and the cylinder head.

Close the engine hood.

More repair case for Volvo excavator pls refer to:Volvo Excavator Trouble Repair

 

 

auto

Recent Posts

How to Replace Fuel Tank Breather Filter Element for Liebherr R9600 Excavator

Here is the instruction show you guide on how to replace fuel tank breather filter…

1 week ago

FENDT 900 Vario COM III B092 Boost Pressure/Temperature Sensor

FENDT 900 Vario COM III tractor Component B092 - Sensor, charge air pressure/temperature reports the boost…

2 weeks ago

Deutz EMR3 Engine Trouble Code 87 / 97 / FlFCD WATER IN FUEL Solution

Deutz EMR3 Engine Trouble Code 87 / 97 / FlFCD WATER IN FUEL Solution Error description…

2 weeks ago

Kubota L3301 L3901 Tractor Hydraulic Flow Test Guide

This instruction show you guide on how to perform hydraulic flow test for Kubota L3301…

3 weeks ago

Bendix AutoVue FLC20 Camera LDW Configuration by JPRO

This instruction show you guide on how to configure Lane Departure Warning for Bendix AutoVue…

4 weeks ago

How to Solve AGCO Machine SPN 102 FMI 03 Boost Pressure Sensor Defect HIGH

This instruction show you guide on how to solve AGCO machine SPN102 FMI03 boost pressure…

4 weeks ago