This instruction guide you how to active DRL (Daytime Running Lights) via For Lights with VCDS for seat leon. If you want to know more about VCDS function, please refer to VCD cases.
Preparation:
How to Configure VCDS & Diagnostic Cable for Your Laptop
VCDS 17.8.1 Full+Loader V2/V4 Free Download
Steps:
Connect VCDS interface to Seat Leon obd port, then run VCDS soft.
Select “Select Control Module”
Select “09-Cent. Elet.”
Select “Coding-07”
Hit “Long Coding Helper”
Seletc “01” and mark “Bit 1”
Then “01” will change to “03”
Hit “Do It!”
It shows Coding accepted, Hit “OK” and “Close Controller, Go Back -06”
DRL activity are done.
If you want to know more about Seat Neon, please refer to Seat trouble repair.
This instruction show you guide on how to solve Scania truck articulation control system ACS…
Magneti Marelli 49FB – Fiat ECU Pinout More ECU PINOUT Components: ECU Modules Repair…
After ECU reparogramming,it is necessary to write new engine number and machine ID into ECU.So…
PCC1302 PowerCommand Low Coolant Level (Warning or Shutdown) Solution Related Contents: 2024 InPower V14.5…
The function identifies the exhaust temperature and indicates malfunction in the exhaust system. The evaluation…
MTU DiaSys diagnostic software is professional on MTU engine diagnostics and programming.But seems that is…