It is a instruction on how to use VCDS to enable/or disable driving school mode for Audi A3 8P.
Preparations:
VCDS Software Download & Installation
Procedures:
Connect VCDS interface to Audi A3 obd port,run software and select “Control Module”
Select “56-Radio”
Click “Adaption-10”
Select “Driving School Function/Time Display”
Here input “1” in the new value filed,and you also can choose 0-4 for you want,and then click “Save”–>”Yes”
Now exit VCDS software,then setup driving school mode
Done!
This instruction show you guide on how to do deactivation test for MANITOU MT6034 telehandlers…
This instruction show you guide on how to solve Liebherr machine ECU2 P1119-00 trouble code…
This instruction show you guide on how to solve Bobcat machine trouble code P18A5 suction…
The measured intake manifold pressure (signal from boost pressure sensor) is below the warning limit…
JCB 3CX 4CX Backhoe Loader engine throttle cable is routed from the L.H. side of the…
Here is the instruction show you guide on how to replace fuel tank breather filter…