This instruction will show you how to repair crack or chip in your windscreen using the rainex kit. This is real easy to do you can do this yourself at home.
Here is same topic article for further reference:
How to Repair Chipped or Cracked Windshield for Any Car at Home
Procedures:
Clean the windscreen down, to make sure there’s no dirt or debris left on the windscreen
Line up clip directly in the center of the hole, press down firmly on the suction pads
This end presses up against the windscreen
Put three to six resin true drops in there
Got pressure driver and screw it in to force the resin into the crack
Release the pressure driver to let out any trapped air. You can look from bottom side to check if you need more drops or not.
Wait for four or five minutes for the resin to absorb into the chip, wait you can’t see any remainder of the chip, remove the device
Replace the curent strip over the chip about 30 minutes and direct sunlight
About 0.5-1 hour, remove the curent strip, take blade which supplied in the kit scrape off any remained and resin
Then repair is done.
More cases about windshield, please click to WINDSHIELD.