This instruction will show you how to program all key lost for Mazda CS-5 2019 via Lonsdor K518.
More cases about key programming, please refer to All keys lost programming.
Same topic about Mazda key programming for further reference:
How to Program 8C Key for Mazda 323 Manually
All Keys Lost Programming by Using MZ001 and AVDI for Mazda CX30 2020
Procedures:
Connect Lonsdor with vehicle, running it
Select “Immobilization”
Select “MAZDA”–”CX-5”–”2018-”
Click “Smart key”
Need power ignition
Click “OK”
Follow the on-screen information:
Press and hold the start button for 10sec, and start button light will turn from green to yellow
Release and click the start button ,the dashboard will be lit up.
After do that, click “OK”
Select “All smart key lost”
Note: all smart keys will be deleted, at least 2 keys are required to complete programming.
Click “OK”
Check what ignition ON, if yes, click “OK”
Wait car horn
It’s very important need two keys.
Switch ignition OFF
Follow the on-screen information:
Turn ignition ON
Click OK, Within 10s put the smart key’s logo side close to car start button
When first key programming finished,
Program the next key as same procedure
Slam brake
Remove key after green light off
Time to cheek remote works or not.
More cases about Mazda key programming, please refer to MAZDA KEY PROGRAMMING.